JY-18002 Alkaid_Solar body induction lamp product selling points

solar charging

1.The product is charged by a 170*115mm large-size polysilicon high-efficiency solar panel. Full charge in about 6 hours with strong light

2 long battery life.

Use specifications 18650_3.7V 2000mAh lithium battery, up to 20 hours of battery life.

3 Uninterrupted electricity .

Even in rainy days, the battery can work on standby for more than 10 days.

4 high-brightness.

uses two 3535_4W lamp beads, the max brightness up to 800Lm

5 The irradiation range is adjustable .

The lamp head can be rotated up & down, left & right by 45 degrees to meet the user's usage scenarios.

6 Human sensitivity.

design 1 large window PIR sensor，viewing angle 145*130 degrees; Long detection distance_up to 10 meters; large detection range_up to 130 degrees

7 Automatic lightingat night

Into the night, the product automatically cut into the light mode.

The above 7 points are mainly performance advantages

8 Unique appearance

Design simulates the face of "Eagle", exactly like the eyes of "Eagle".

9 Good material

Use ABS engineering materials to complete injection molding,the bracket is processed by aluminum alloy profiles.

10 Simple operation

With a power button switch on the back of the product, which is convenient for one-key opening of the product.

Function mode selection, the button has a corresponding indicator light to

11 Easy to install

It's equipped with a chassis,

which is easy to install on any building wall through the profile bracket.

12 Waterproof

IP 65

The five is product's own advantages.

一、Application Scenario Description:

1. It's a green new energy solar lamps;

Suitable for home portal lighting, outdoor courtyard, alley, wall, community, garage lighting.

2.Choose a location with sufficient sunlight to install the product,

the recommended installation height is about 2.5 meters from the ground.

3. The product is an outdoor solar lamp, designed according to IP65,

with a high level of dustproof and rainproof.

二、Installation Instructions:

1. With a mounting base for easy installation and removal.

2. Mount the base on the building wall or outdoor bracket,

and fix the solar body sensor light through the bracket.

3. After be fixed, you can adjust the angle of the spotlight.

The best angle of the solar panel is about 20 degrees.

According to the actual situation of the site, the spotlight adjustment range is 45 degrees up and down, left and right.

三、Function description

1. Press the POWER button to start the product power supply.

2. Press the MODE button to enter the function mode selection.

Mode 1: lights up when people come, lights off when no one.

Mode 2: Long until dawn.

Mode 3: high light when people come, low light when no one.

3. At the night, people close to the sensor light within 10 meters, light on; People leave,light go off

after 30 seconds.

High sensitivity of induction detection, can sense the human body in130 degrees and light up work.

Base set

1. 1pcs 18650_3.7V 1500hmA lithium iron phosphate battery for power supply.

2.1 PCs 5V_2.5 W polycrystalline high-efficiency solar panels.

3. 2pcs_4w 3535 high light patch led _ color temperature 5000K, display finger 80.(with 2 convex lenses)

4. 1pes PIR human body pyroelectric infrared sensor.

5. 1pcs power ON/OFF switch(POWER key).

6. 1PCs function mode selection switch (MODE key).

7. 1pcs red/green/blue three-color indicator light_for product function mode selection indication.

8. The product supports solar charging, light control, and human body induction to trigger lighting functions.

9. PCBAholds lithium battery charge/discharge protection module.

Function description

1. The product is installed and fixed on any building wall or outdoor support by tightening the expansion rubber plug with 2 screws on the base.

2. Installation location_Choose a location with sufficient sunlight so that the solar panel can better face the sunlight.

3. Press the POWER button, the solar panel receives sunlight to recharge the lithium battery, at the same time, the product's human body sensor brightness function is turned on.。

4. Press the MODE button to select the product function mode, and at the same time the corresponding indicator light is on for 5 seconds and then goes out; indicating the user's function selection.

5. Notice: The product is powered on for the first time, and the default function mode ofthe program is 1.

6. Red light indication_Mode 1.(The product enters the induction mode, and if someone senses at night, the LED light will be bright for 40 seconds and then turn off).

7. Green light indication_Mode 2.(The product enters the constant light mode, when the day tuns to night, the LED light is low brightness_steady light).

8. Blue light indication_Mode 3.(The product enters the sensing mode, when someone senses at night, the LED light is bright for 40 seconds, and the LED light is low brightness_steady on when no one is there).

9.The solar panel and the main light can be rotated left, right, up and down respectively, which is convenient for user experience and the choice oflighting orientation.。